The Digital Darailine configurator draws a detailed online view of the fence according to your own custom dimensions, then calculates the number of metal modules needed for assembly in your garden. The modular fence calculator is very intuitive and allows you to choose from different styles and colors. As an expert in perforated sheet metal, Dampere a wide range of designs.

Project reference: Enter the name of the project so that it can be easily found. This information allows for more accurate information exchange in the long term. The reference will also be indicated on the purchase order, delivery note, and in every chat conversation or discussion with our employees.

Fencing systems: selection of the metal support structure model
– Clofitwith welded plate for a constant height of 1800 mm

– Clotyra with screw-on plate for variable height from 1000 to 1800 mm

Revised fence dimensions:

• Based on your measurements taken on the outer edges around the site, subtract 50 mm from each of the values in order to avoid placing the plates too close to the edges and prevent cracking of the concrete edge when installing the mechanical anchors (reminder of best practices).
• Return pieces must have the same dimensions at the left and right angles to facilitate the design of fence modules.
• If necessary, you can break down your project into several sub-assemblies, allowing you to calculate modules that are more tailored to your needs. This technique will enable you, for example, to create corner returns of different sizes.
• The result of the length layout has a tolerance of – 20 mm / +20 mm.

Height:

Corresponds to the ground value at the highest point of the fence. Can only be modified on the Clotyra model.

Project rendering:

Set of values that determine the actual composition of your Fence kit as it will be delivered. Please note that some dimensions may vary slightly from your original settings.

Reason:

This button allows you to choose between blackout panels, either perforated sheet metal or laser-cut panels, from a range of abstract, random, plant, progressive, and regular designs.

Color:

This button allows you to adjust the color according to the RAL color chart available in the digital interface, from white to gray to black and a range of other available shades.

Are the dimensions imposed by the configurator not suitable for you? You can then design your parts one by one, giving you more freedom to choose the format you want.